Toyota Rav4.4 Information
How to clear the 'maintenance required'/oil
change light using the DISP button?
| step 1 turn the key to the 'on' position. using the DISP button, toggle
the lcd until 'TRIP A' is displayed. |
| step 2 turn the key off. now, push and hold the DISP button. while
holding the trip meter button, turn the key to 'on'. |
| step 3 while you continue to hold the trip meter button, you will see on the
lcd disply five (5) small dashes and they will begin to 'count down' rather
quickly. |
| step 4 continue holding the trip meter button and once all the dashes have
been cleared, your lcd will display six zeros (000000) - release the trip meter
button now - and then the lcd will display 'ODO' and your current mileage. at
this time, your 'maintenance required'/oil change light has been reset. |
I disconnected my battery and now
my power windows and power moonroof aren't working properly. what's wrong?
|
resetting the power windows
|
resetting the power moon roof
|
|
step 1
|
turn the key in the ignition to 'on'. |
step 1
|
turn the key in the ignition to 'on'. |
|
step 2
|
on the driver's side control, push down (do not use 'one-touch' down) the
power window switch for the driver's side window and lower the window
halfway. |
step 2
|
keep pressing the sliding roof switch to the close side until the center
glass panel is fully closed. |
|
step 3
|
pull up (do not use 'one-touch' up) the power window switch until the window
closes and hold the switch for *at least* one second. |
step 3
|
if the switch remains pressed for approximately two more seconds after the
panel is fully closed, the sliding roof ECU memorizes the fully closed
position. |
|
step 4
|
repeat these steps for the passenger side window on the passenger door
window control. the windows should now open and close like they should. |
step 4
|
the center panel glass returns in the open direction a little and informs
that initialization is complete. |
My tire pressure light is on and i know my tires
are correctly inflated. how do i re-initialize the tire pressure warning system?
|
step 1
|
check and make sure that your tires are inflated to the correct pressure
|
|
step 2
|
turn the ignition switch to the ON position. If the low tire pressure
warning light comes on, push and hold the tire pressure warning reset
switch (in the glove box) until the warning light turns off and then
release the switch.
|
|
step 3
|
now press and hold the tire pressure warning reset switch until the low
tire pressure warning light blinks three times.
|
|
step 4
|
initialization is *not* completed until driving at the
vehicle speed of 19 mph or over for more than one hour. the tire pressure
monitoring starts when initialization is completed. |
What are the bulb sizes for the 4th gen Rav4?
|
light bulbs |
bulb number |
watts |
type |
|
headlights (high) |
9005/HB3 |
60 |
HB3 halogen |
|
headlights (low) |
9005/HB3 |
50 |
HB4 halogen |
|
oem fog lights |
H16 |
50 |
HB4 halogen |
|
